Window & Door installation service.
Usually fixing up others non-complying installations throughout Australia when touring on a regular basis!
Wedge Block Usage & PU Foam Procedure (Zig Zag Formation From Bottom To Top)
Finished Product Excluding Trim Finish (Overview)
For Reveals, we use Primed & Treated (H3) Pine Timber.
Using Bosch & Milwaukee tools!
2 years workmanship labour warranty with
$20 Million Liability Insurance Via AAMI!
All items frames, glass & screens arrive in one shot.
Not separate like the majority do!
Handling glass is a skill & your vehicle needs to be setup appropriately to avoid any dings, chips or scratches!
If you'd have the windows/doors already removed for me, that's a saving of $150ea (30mins-1:15hrs)
If you only then just want them aligned, plumbed & fixed in, $150ea (20-45mins)
Reveals attached on-site, if not from factory $70ea (30mins)
New Build; (Sealing) 75mm or 150mm wide Bituminous or High-Adhesion Flashing Tape $65-$95 per opening (25mins)
New Build; (Sealing) 75mm or 150mm wide Bituminous or High-Adhesion Flashing Tape $65-$95 per opening (25mins)
PU Low Expansion Substrate/Joist/Frame Foam $30 per side (25mins)
Foam Cut-Back & Caulking $75 per side (1:45hrs-2:45hrs) MS Polymer used - NOT Polyurethane base that cracks after 2yrs!
Trim work options:
Tri-Quad Fillet Moulding $90 per side, or
L-Angle Trim $120 per side - all cut with a mitre saw, not shears or snips!
Glass cleaned thoroughly $10 per side.
So a window install can be between; $150-$935ea Inclusive of GST with 5yrs Workmanship warranty!
Usually fixing up others non-complying installations throughout Australia when touring on a regular basis!
PU Foam & Mounting Bracket Fixing Clip Proper Installation Use (collage)
Wedge Block Usage & PU Foam Procedure (Zig Zag Formation From Bottom To Top)
Finished Product Excluding Trim Finish (Overview)
Here is an example video of a European window installation taking place with Blaugelb products being used below;
There is a certain, specific & proper way of installing DGU & TGU pane glass with glazing packers into the uPVC frames.
So please do your research before attempting to install them yourself!
Otherwise, you will experience buckling, misalignments & sloping sash panels!
I can't provide this information for free, sorry )
If you want to attempt your own installation & are confident.
I do sell all the glazing tools required to perform the task yourself (click here to shop)
So please do your research before attempting to install them yourself!
Otherwise, you will experience buckling, misalignments & sloping sash panels!
I can't provide this information for free, sorry )
If you want to attempt your own installation & are confident.
I do sell all the glazing tools required to perform the task yourself (click here to shop)
For Reveals, we use Primed & Treated (H3) Pine Timber.
For anything else not mentioned here regarding anything to do with uPVC installations, please forward your enquiry to uPVC.com.au@GMail.com